These aren't ordinary pedals. The P1 pedal is a simple, intelligent and uncompromising design that provides the same proven PowerTap accuracy and reliability. The simple one-piece design easily mounts to any crank and does not require calibration nor installation angle setting, providing a true “plug-and-play” experience. The P1 also features dual band ANT+ and Bluetooth SMART for compatibility with a multitude of head units and smart devices. Plus, the independent measurement opens the possibility for a new set of pedaling metrics previously unavailable to help give you the ultimate competitive edge.
Evo's Alloy MTB Pedals are lightweight and low profile, perfect for trail or city use. They're compatible with clips and straps too!
- Weight: 340g - Body: Magnesium - Spindle: CroMo - Bearings: 1 Cartridge - Bushings: 1 DU - Pins: 40 Volcano pins per pedal - Size: 100x98x18 (mm) - Colors: Gold, Black, Red, White
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
Built to be just as robust and just as precise as its world-renowned sibling, the PowerTap Single-Sided Pedal has all the innovation of the P1 pedals – at a fraction of the price. Named for its single-sided nature, the PowerTap Single-Sided Pedal doubles the watts produced by the left pedal to calculate total power. The PowerTap Single-Sided Pedal also touts the same plug-and-play installation, easy-to-swap, cross-bike compatibility, along with dual-band ANT+ and Bluetooth as its bi-lateral counterpart. Ideal for the bike enthusiast, the weekend warrior or the power-training curious, there is no better way to get started with accurate pedal-based power than the PowerTap Single-Sided Pedal. - Weight: 390 grams per pair of pedals (without batteries) - Thread Type: 9/16" - Cleat Interface: 3 bolt - Cleat: Red, 6 degree floating - Spring Type: Adjustable Elastomer - Proven PowerTap accuracy - Release Tension: 6-20 Nm - Stack Height: 14mm - Center of Pedal: 53mm (measured from crank to pedal) - Lean Angle: 25.5 degrees (based on 175mm crank length, 75mm BB drop and 147mm Q-Factor crank) - Firmware Updates: Over the air - Connectivity: ANT+ and Bluetooth SMART - Battery: AAA Lithium (alkaline and/or rechargeable alkaline batteries not recommended for extended use) - Battery Life: 60 hours - No weight limit - PowerTap Single-Sided Pedals are not capable of providing advanced pedal metric data. In order to display advanced pedal metric data you must be using dual-sided P1 pedals.
Dimension Touring Pedals. - Die-cast, 1-piece caged-type pedal with reflectors - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 320g
Dimension Town Pedals. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel
Chromag worked with Brandon Semenuk to design a pedal that features a lightweight, compact platform body that extends inboard bringing the riders feet closer to the cranks for superior control. The Contact pedal has a very low-profile, concave CNC’d surface that is only 13mm at pedal center and weighs in at only 190g per pedal.
These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals.
Shimano's M520s are affordable clipless pedals that are easy to enter and exit, and built to last. They boast dual-sided Shimano SPD bindings, which make them perfect for mountain bikers or roadies who prefer wearing walkable shoes with recessed cleats. The bindings are adjustable for dialing in the perfect entry and exit tension, and they have an open, mud-shedding design that prevents clogging. Chromoly axles and sealed bearings add tons of durability.
Shimano's Saint Flat Pedals are the ultimate platforms for downhill domination, proven at the World Cup-level and ridden by the pros. The platforms feature a concave surface and 18 replaceable pins per pedal. The length of the pins is customizable so you can dial in how much traction you need on your runs, and the cut-aways on the pedals clear mud easily. Saint parts are renowned for their durability, and the pedals are no exception. These pedals have burly axles and rock solid platforms so you can go big, huck to flat, and pedal away smiling.
Specialized's Boomslang Platform Pedals are insanely thin, yet still wickedly strong. A tapered outside pedal edge provides maximum grip and ground clearance, while the super low-profile design—a mere 10mm at the center—is like a direct telepathic line from your body to the bike. Custom undercut pins provide incredible traction and are simple to remove, and should one break during your ride, each pedal carries four hidden pins for easy replacement. • Super slick, patent pending, spindle design • Super low-profile design; 10mm thickness at center • Custom undercut pins provide “clip in” style grip and easy removal • Pedal body carriers 4 hidden pins for easy replacement of broken pins • Tapered outside pedal edge for maximum grip and ground clearance • Large foot platform for modern day DH, 110x108mm
Based on their race-winning XTR design, Shimano's Deore XT SPD Pedals deliver super easy entry and exit, wide, stable platforms, and an open, mud-shedding design. They're also built to last with tough chromoly axles and low-maintenance sealed bearings. And the cleat tension is adjustable so you can dial in the perfect setting.
Shimano's M424s features large, replaceable resin platforms for sure footing on every ride, along with easy to enter and exit Shimano SPD bindings. With cartridge-bearings and a simple binding tension adjustment, these are grippy, user-friendly and durable all-terrain pedals you'll love.
Evo's LU-A18 Platform Pedals are aggressive DH pedals that use a 1-piece aluminum body for serious toughness. The large, concave platform gives you huge surface area when going big and going fast. Removable pins deliver maximum traction. They're durable too, with burly cromo axles and sealed bearings.
The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 332g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float)
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) - Colors: Black, Gray, Orange, Pink *Titanium spindles have 180lbs weight limit.
- Weight: 312g - Body: CrMo Investment - Spindle: Cromoly - Bearings: 1 Cartridge/2DU - Springs: SWP - Cleat: XPEDO XPT (6° Float)
- Weight: 245g - Body: NEP Injection-Molded - Spindle: Cromoly - Bearings: Loose Ball - Springs: SWP - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
- Weight: 220g - Body: NEP Injection-Molded - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
- Weight: 210g CrMo - Body: Carbon Injection-Molded - Spindle: Cromoly - Bearings: 3 Cartridge - Retention: MDU Elastomer (Preset) - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
- Weight: 168g Ti - Body: Carbon Injection-Molded - Spindle: Titanium - Bearings: 3 Cartridge - Retention: MDU Elastomer (Preset) - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed) *Titanium spindles have a 180lbs rider weight limit.
- Weight: 250g - Body: 6061 CNC Aluminum - Spindle: CroMo - Bearings: 3 Cartridge - Cages: 6061 Aluminum - Size: 77.2x81x21 (mm)
- Alloy Cage - Replaceable Cleats - Sealed Bearing - 300g (each)
With loads of traction, sure-footedness, and premium control, Specialized's Bennies Platform Pedals are ready for everything from freeride madness to trail riding. They're made of a rugged, yet lightweight concave aluminum body with 24 replaceable pins for maximum grip. Durable chromoly axles and sealed cartridge bearings mean they're built to last.
For a sure grip and premium control, put Specialized's P.Series Platform Pedals on your favorite ride. They're made of a rugged nylon and boast durable chromoly axles so they're light and built to last.
You can't conquer the trails without power and control. Thankfully, Spank's Oozy Trail pedals give you a rock-solid platform to power all of your off-road exploits. • Cold Forged Alloy Pedal Body • Hollow Taper Scandium Enriched Steel Axle • 12mm Thin - Massive 11x11cm Platform • 360g per pair (with full pin compliment) • 18 Adjustable Pins per Pedal • New CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence • Oversized Sealed Full Compliment Inboard Industrial Bearing • Sealed Outboard IGUS Bushing • Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin • Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces • Chamfered Side Edges for Improved Cornering Clearance
The original game changer! SPANK Industries' SPIKE Pedals changed the world's concept of the benefits a flat pedal can offer and set the benchmark for top of the line value. The SPIKE Pedal's svelte 12mm thin forged alloy body not only maximizes pedaling clearance, but also grip and stability, by placing the rider's foot closer to the pedal axle. Equipped with forged hollow-tapered chromoly steel axles, SPIKE Pedals offer unmatched ultimate strength at just 420g per set. 20 steel pins in a virtual concavity configuration offer supreme grip without compromising platform thickness. Oversized industrial sealed bearings and IGUS bushings guarantee exceptional durability and performance. Often imitated, the SPIKE's CNC chamfered leading edges deflect impact forces and bring and instantly recognizable edgy aesthetic that always turns heads. - 12mm thin - Massive 100x100mm platform - ±420g/set (with full pin complement) - Cold forged, CNC optimized alloy pedal body - Cold forged chromoly steel axle - Chamfered leading edges for improved clearance and reduced impact forces - Chamfered side edges for improved cornering clearance - Oversized sealed full compliment inboard industrial bearing - Sealed outboard IGUS bushing - 20 adjustable pins per pedal - Full sized hex head pins improve durability and maintenance - Inboard friction seal prevents contamination and reduces unwanted pedal spin
SPANK Industries set out to make the perfect pedal for every rider, and the SPOON Pedals offer three platform width options for riders of any age or foot size. The SPOON 90 Pedals are the perfect solution for younger riders and many women who have compromised ideal support and grip with traditional size flat pedals. SPANK SPOON 100 Pedals are ideal for riders with average sized feet who want a flat pedal upgrade that won't break the bank. The extra wide pin pattern on SPANK's SPOON 110 Pedals spread load around the perimeter of large sized shoes, offering more predictable grip and enhanced support over traditional size flat pedals. Each SPOON pedal sports a 16mm-12mm concave profile lined with 20 steel pins, as well as a forged chromoly axle which delivers the strength and durability SPANK pedals are famous for. - SPOON 90 Pedals: US Men size 6 (Euro 39) and under; ±360g /set - SPOON 100 Pedals: Men sizes 7 to 10 (Euro 39-44); ±400g /set - SPOON 110 Pedals: US Men sizes 11 (Euro 44) and up; ±420g /set - Industrial grade axle assembly - Chamfered leading edges - MGR extruded, CNC optimized alloy body - 12-16mm concave platform profile - Cold forged chromoly steel axle - Industrial sealed bearing and IGUS bushing - 20 steel pins per pedal - Shot peen anodized finish with laser logos - Available in Black, Red, Blue, Green - Suitable for Kids, Race, Freeride, Trail
Shimano's M545s are great for blasting BMX courses, dual-slalom runs and technical trails. They boast large toothed platforms that grip non-cleated shoes for top-notch control and comfort. Plus, there are Shimano SPD bindings, too, to grab your cleated shoes for cross-country use, and they're angled for easier entry. These pedals feature rugged chromoly axles and durable sealed-cartridge bearings, too.
Page 1 of 8 Next page